References
Details
More photos can be found in the Energy industry Tab.
KEY FEATURES
- High tensile strength, shock resistance
- Eletrically non-conductive
- Low weight, simple installation
CABLE BRIDGES
Cable bridges are built from composite angle profile side rails and flat connecting beams.
Rail-connector joints are riveted. We recommend consulting the beam type with our technical staff based on projected load.
CABLE BOXES
Made of open U beams, with optional lids.
CABLE SUPPORTS
We offer two basic designs of cable supports:
- Pylons and support beds made of square tube
- Pylons made of double-L angle profile, support beds made of square tube
SUSPENSION SYSTEMS
The system consists of a vertical tray and support beds. The tray is anchored to the load-bearing
structure from below using stainless steel anchors.
Standard products use the following beam types:
- Vertical tray – square tube ST 50×50/5; bed – round tube ST 32/2.5
- Vertical tray – round tube RT 38/5; bed – round full rod, 14 mm diameter
RECOMMENDED SIDE BEAM LOADS
TYPE | BEAM | DISTANCE OF SUPPORTS | ||
---|---|---|---|---|
L = 1,000 mm | L = 1,500 mm | L = 2,000 mm | ||
1 | L 50 x 30 / 5 | 800 N/m | 400 N/m | 200 N/m |
2 | L 30 x 50 / 5 | 2,400 N/m | 900 N/m | 400 N/m |
3 | L 51 x 51 / 6 | 2,500 N/m | 1,100 N/m | 500 N/m |
4 | L 76 x 76 / 6 | 4,000 N/m | 2,200 N/m | 1,000 N/m |
RECOMMENDED CONNECTING BEAM LOADS
TYPE | BEAM | RUN WIDTH | |||
---|---|---|---|---|---|
200 mm | 300 mm | 400 mm | 500 mm | ||
1 | I 26 x 5 | 900 N/m | 300 N/m | 120 N/m | 75 N/m |
2 | I 30 x 8 | 2 550 N/m | 750 N/m | 300 N/m | 165 N/m |
3 | flat bar 30 x 5 | 3 000 N/m | 900 N/m | 450 N/m | 210 N/m |
4 | I 40 x 12 | 6 000 N/m | 1 800 N/m | 900 N/m | 420 N/m |
CABLE BOXES SELECTION
TYPE | NAME | DIMENSIONS [mm] | WEIGHT [kg/m] |
---|---|---|---|
1 | Cabel box CBc | 400 x 100 /5.5 | 10.01 |
2 | Cabel box CBc | 300 x 150 / 4.5 | 7.15 |
3 | Cabel box CBc | 300 x 100 / 4.5 | 6.28 |
4 | Cabel box CBc | 200 x 100 / 3.5 | 3.89 |